The Style subpage has the following options:

• Visible: turn this setting on to display the legend.

• Inverted: turn this setting on to display values in the legend from largest to smallest rather than the usual smallest to largest.

• Font Series Color: turn this setting on to display the text for each item in the legend using the color of its item in the chart. With this turned off, the color specified in the Text subpage (discussed later) is used.

• Boxes: this setting, which isn't labeled, allows you to specify whether check boxes or radio buttons appear for legend items. With check boxes turned on, you can hide specific series by turning off their check boxes. With radio buttons, only one series at a time is displayed, the one with the selected radio button.

• Legend Style: the style for the legend. "Automatic" means the legend is automatically formatted as appropriate. "Series Names" displays the names of series; if a series field isn't used, only a single "Series0" appears. "Series Values" displays the values for the series if a series field is used or the category name for each item if not. "Last Values" displays only the last item in each series.

• Text Style: use this option to specify how the legend is formatted. "Plain" means the legend includes category names (or series names if a series field is specified) only with no values. "Left Value" and "Right Value" mean the values for each category appear, either to the left or to the right of the category name. "Left Percent" and "Right Percent" mean each category's value appears as a percentage of the total, either to the left or to the right of the category name. "X Value" displays the category number for each item. "Value" shows only the value for each item. "Percent" shows only the value as a percentage of the total. "X and Value" displays the category number and its value. "X and Percent" shows the category number and value as a percentage of the total.

• Vert. Spacing: this setting specifies the vertical spacing between items in the legend.

• Dividing Lines: click this button to display the Border Editor dialog for lines between each item in the legend.
  

The Position subpage has the following options:

• Position: this option specifies the location of the legend. The choices are Left, Right, Top, and Bottom.

• Resize Chart: turn this setting on to resize the chart to account for the space taken up by the legend. If it's turned off, the chart fills the chart area.

• Margin: use this setting to specify the amount of space between the chart and the legend. "0" means the space is automatically determined.

• Position Offset %: this option determines the amount of space between the top or left edge of the chart (depending on the legend position) and the legend as a percentage of the chart size.

• Custom: turn this setting on if you want to specify a custom position for the legend.

• Left: this option, which is only available if Custom if turned on, specifies the left position of the legend.

• Top: this option, which is only available if Custom if turned on, specifies the top position of the legend.

• Percent: this option, which is only available if Custom if turned on, indicates whether the values for Left and Top are in pixels (turned off) or percent (turned on).
  

The Symbols subpage controls the appearance of the legend symbols, which represent the items in the chart. It has the following options:

• Visible: turn this setting on to display symbols in the legend.

• Continuous: turn this setting on to have the symbols run together, or turn it off to display symbols as individual shapes.

• Squared: turn this setting on to display squares for symbols, or turn it off to use rectangles.

• Width: this option, which is only available when Squared is turned off, specifies the width of the symbols.

• Width Units: this setting determines whether Width is specified in pixels or percentage of the legend box width.

• Position: select the desired location of the symbols, either to the right or left of the text.

• Gradient: click this button to display the Gradient Editor dialog for the text.

• Border: click this button, which is only available when Default border is turned off, to display the Border Editor dialog for lines between each item in the legend.

• Default border: turn this setting on to use the default border for the legend.
  

The Options subpage of the Title subpage has the following options:

• Text: the text for the title.

• Text alignment: this option specifies the alignment for the title text.

• Visible: turn this setting on to display the title.
  

The Format subpage of the Title page has options which specify the shape in which the title appears. It has the following options:

• Color: click this button to display a dialog in which you can select the inner color for the shape.

• Frame: click this button to display the Border Editor dialog for the shape.

• Pattern: click this button to display the Pattern Color Editor dialog.

• Bevel: this setting specifies whether the shape appears with a lowered, raised, or no bevel.

• Size: this setting, which is only available if Bevel is set to something other than None, specifies the size of the bevel.

• Round Frame: turn this setting on to display the shape with a round frame.

• Transparent: turn this setting on to display a transparent shape.

• Transparency: use this setting to control the amount of transparency (in percent) of the shape.
  

The Text subpage has the following options:

• Font: click this button to display a dialog in which you can select the font and size of the text.

• Color: click the colored square to display a dialog in which you can select the color of the text.

• Outline: click this button to display the Border Editor dialog for the outline of the text.

• Inter-char spacing: increase the value of this setting to space the characters further apart.

• Gradient: click this button to display the Gradient Editor dialog for the text.

• Shadow: click this button to display the Shadow Editor dialog for the text.

• Outline gradient: turn this setting on to use a gradient for the text outline.
  

The Gradient subpage of the Title page controls the gradient settings for the shape in which the title appears. It has the same settings as the Gradient Editor dialog.

The Shadow subpage of the Title page controls the shadow for the shape in which the title appears. It has the same settings as the Shadow Editor dialog.

The Format subpage has the options which specify the shape in which the legend appears. It has the following options:

• Color: click this button to display a dialog in which you can select the inner color for the shape.

• Frame: click this button to display the Border Editor dialog for the shape.

• Pattern: click this button to display the Pattern Color Editor dialog.

• Bevel: this setting specifies whether the shape appears with a lowered, raised, or no bevel.

• Size: this setting, which is only available if Bevel is set to something other than None, specifies the size of the bevel.

• Round Frame: turn this setting on to display the shape with a round frame.

• Transparent: turn this setting on to display a transparent shape.

• Transparency: use this setting to control the amount of transparency (in percent) of the shape.
  

The Text subpage controls the legend text. It has the following options:

• Font: click this button to display a dialog in which you can select the font and size of the text.

• Color: click the colored square to display a dialog in which you can select the color of the text.

• Outline: click this button to display the Border Editor dialog for the outline of the text.

• Inter-char spacing: increase the value of this setting to space the characters further apart.

• Gradient: click this button to display the Gradient Editor dialog for the text.

• Shadow: click this button to display the Shadow Editor dialog for the text.

• Outline gradient: turn this setting on to use a gradient for the text outline.
  

The Gradient subpage controls the gradient settings for the legend shape. It has the same settings as the Gradient Editor dialog.

The Shadow subpage controls the shadow for the legend shape. It has the same settings as the Shadow Editor dialog.